Comparison Of Stone Plastic Floor And Linen Floor

Stone plastic floor and linen floor are both elastic floor, but there are differences:

The composition and production process are different: linseed flooring is made by laminating a mixture of oxidized linseed oil, cork and wood flour onto a jute backing. The stone plastic floor is made of natural marble powder to form a solid base layer with a high density and high fiber network structure. The surface is covered with a super wear-resistant polymer PVC wear-resistant layer, which is processed through hundreds of processes. From this point on It is said that linen is made of pure natural linen raw materials, but the stone plastic floor is made of natural stone powder and natural resin, which are pure green environmental protection materials.

There is a difference in abrasion resistance and stability: the scoring resistance of the linoleum floor is average, and the linoleum floor is hard and soft. This is the reason why the scoring resistance of the thick linoleum floor is not very good. In comparison, the stone plastic floor Better abrasion resistance. In addition, the dimensional stability of linoleum flooring is general, therefore, strong glue must be used. On the whole, linoleum flooring is less stable than stone plastic flooring.

The degree of maintenance is different: the linoleum floor needs to be cured under natural light, the sample and the actual object will be different and yellow, the resistance of the linoleum floor to maintenance products (PH>7) is poor, and the linoleum floor needs to be polished and polished again. Special care products must be used when waxing. Linoleum flooring is much harder than stone plastic flooring, but because the surface is porous, all stains must be quickly removed, otherwise the surface will leave marks that are difficult to remove and have to be polished and waxed again. Because it is not a thermoplastic material, it cannot be recycled, and the burned marks can be easily polished off. However, for deeper burn marks, it is much easier to polish through core stone plastic flooring than linen flooring.

There is a difference in the ease of installation: it is more difficult to install linoleum, if the indoor temperature is too low, the linoleum will break. Due to its absorbing nature and dimensional instability, the product must be installed quickly with strong glue. For example, in one day, an installation team can lay 80 to 100 square meters of stone-plastic floor, or maybe only 60 square meters of linoleum floor. Linseed oil is not sensitive to temperature. You cannot use welding rods of the same material for welding, so it is not a welding but a "joint", so the linseed floor cannot be classified as E3 waterproof. The linseed floor is not suitable for wet rooms or clean Required area. The linen floor will emit a strong smell and stay in the installation room.