Solid Wood Composite Floor Purchase Skills

1. There are two types of solid wood composite flooring, one is a three-layer solid wood floor, which is composed of three layers of wood panels, namely, the surface board, the core board and the back board. Another type of multi-layer solid wood flooring is composed of seven or nine layers, and its stability is better than that of three-layer solid wood flooring. Especially in the geothermal environment, the multi-layer solid wood floor has strong heat resistance and is more resistant to deformation. Therefore, according to your own needs when buying, if you choose a floor for geothermal use, you must choose a multi-layered floor.

2. The appearance is the same as solid wood flooring, and solid wood composite flooring is also divided into three categories: excellent, first-class and qualified products. Appearance quality is an important basis for classification. When purchasing, first look at the color and texture of the surface wood. Generally, the surface should not have wood defects such as decay, dead knots, knot holes, wormholes, laminated resin capsules, cracks or loose seams, and the wood texture and The color perception should be harmonious. At the same time, you should also observe whether the tongues and grooves around the floor are flat.

3. The quality of the paint and the coating method are important factors that determine the environmental protection, wear resistance, hardness and other parameters of the floor. Floor paint should be environmentally friendly, and should not contain halogenated hydrocarbons, heavy metals, formaldehyde and other harmful radiations. In addition, the coating method of floor paint should also be inquired and examined clearly. The six-sided sealing paint of the floor, the surface, back and four sides must be sealed with UV paint and water-based paint, which plays a role of tightly resisting water and moisture and preventing paint from falling off. The paint should have filling properties, full color, and resistance to scratching, not easy to fall off.

4. Installation of multi-layer solid wood flooring is made by assembling and bonding multiple wood veneers. The quality and environmental performance of the floor adhesive are very important. Once the glue used is not good or even inferior, it will seriously exceed the standard of formaldehyde and affect the health of the user. Therefore, it is best for consumers to buy E1 floor when buying, so that they can use it with confidence.

5. Multi-layer solid wood flooring with formaldehyde content is assembled and bonded by multiple wood veneers. The quality and environmental performance of the floor adhesive are very important. Once the glue used is not good or even inferior, it will seriously exceed the standard of formaldehyde and affect the health of the user. my country's current mandatory highest standard for floor environmental protection is E1 level, that is, the average formaldehyde emission is less than 1.5mg/L. Therefore, it is best for consumers to buy E1 floor when buying, so that they can use it with confidence.

6. When splicing and getting the floor, you can take more than 5 pieces of floor in a packing box and place it on the glass table or flat ground for assembly. After assembling, pat the tongue and groove tightly by hand to observe whether the tongue and groove connection is tight, and then touch it by hand to feel whether it is smooth. After touching it by hand, pick up the two assembled multi-layer solid wood composite floors and shake them in your hands to see if they are loose. If there is a prominent hand feeling and looseness, the product is unqualified.