How To Clean Spc Flooring

Spc floor cannot be used as marble or ceramic tile during daily use. Failure to understand floor maintenance knowledge during maintenance will cause damage, pollution and other problems. We should pay attention to the following points when we usually maintain:

(1) Cleaning and maintenance after the floor is laid/before use: 　　

1. First remove the dust and debris on the floor surface.　　

2. Wash with clean water and blot dry.

(2) Daily cleaning and maintenance:

1. Push dust or vacuum cleaner to vacuum. (Move the ground drag dust agent on the ground, dry it and push the dust.)　

2. Wet mopping. (Use the floor cleaning polish to dilute with water at 1:20, and mop the floor with a semi-wet mop.) If necessary, you can also use a floor scrubber with low-speed cleaning.

(3) Complete refurbishment treatment: 　　

1. Push dust or vacuum cleaner to vacuum.　　

2. Dilute with strong dewaxing water 1:10 and spread it evenly on the ground, wait for 5-10 minutes, clean and dewax at low speed with a floor scrubber and red polishing pad. Use a water suction machine to suck up the sewage in time.　

3. Wash with clean water and absorb dry until there is no residual detergent on the floor.　　

4. If necessary, apply 1-2 layers of high-strength surface wax.　　　

(4) Treatment of special dirt: 　　

1. Oil stains: For local oil stains, pour the stock solution of the water-based degreaser directly on a towel to wipe; for large areas of oil stains, dilute the Vite water-based degreaser at 1:10, then clean it at a low speed with a mopping machine and a red polishing pad.　　

2. Black offset printing: Polishing with spray cleaning maintenance wax, high-speed polishing machine and white polishing pad. For long-time black offset printing, you can pour the strong black offset remover directly on the towel and wipe it.　　

3. Gum or chewing gum: Use a professional strong glue remover to pour directly on the towel and wipe it off.